Module error

There was a conflict when importing from the specified S3 source. This can occur when the current import conflicts with a previous import request that had the same client token.

ImportNotFoundException

The specified import was not found.

IndexNotFoundException

The operation tried to access a nonexistent index.

InternalServerError

An error occurred on the server side.

InvalidEndpointException

InvalidExportTimeException

The specified ExportTime is outside of the point in time recovery window.

InvalidRestoreTimeException

An invalid restore time was specified. RestoreDateTime must be between EarliestRestorableDateTime and LatestRestorableDateTime.

ItemCollectionSizeLimitExceededException

An item collection is too large. This exception is only returned for tables that have one or more local secondary indexes.

LimitExceededException

There is no limit to the number of daily on-demand backups that can be taken.

For most purposes, up to 500 simultaneous table operations are allowed per account. These operations include CreateTable, UpdateTable, DeleteTable,UpdateTimeToLive, RestoreTableFromBackup, and RestoreTableToPointInTime.

When you are creating a table with one or more secondary indexes, you can have up to 250 such requests running at a time. However, if the table or index specifications are complex, then DynamoDB might temporarily reduce the number of concurrent operations.

When importing into DynamoDB, up to 50 simultaneous import table operations are allowed per account.

There is a soft account quota of 2,500 tables.

GetRecords was called with a value of more than 1000 for the limit request parameter.

More than 2 processes are reading from the same streams shard at the same time. Exceeding this limit may result in request throttling.

PointInTimeRecoveryUnavailableException

Point in time recovery has not yet been enabled for this source table.

PolicyNotFoundException

The operation tried to access a nonexistent resource-based policy.

If you specified an ExpectedRevisionId, it's possible that a policy is present for the resource but its revision ID didn't match the expected value.

ProvisionedThroughputExceededException

Your request rate is too high. The Amazon Web Services SDKs for DynamoDB automatically retry requests that receive this exception. Your request is eventually successful, unless your retry queue is too large to finish. Reduce the frequency of requests and use exponential backoff. For more information, go to Error Retries and Exponential Backoff in the Amazon DynamoDB Developer Guide.

ReplicaAlreadyExistsException

The specified replica is already part of the global table.

ReplicaNotFoundException

The specified replica is no longer part of the global table.

ReplicatedWriteConflictException

The request was rejected because one or more items in the request are being modified by a request in another Region.

RequestLimitExceeded

Throughput exceeds the current throughput quota for your account. Please contact Amazon Web ServicesSupport to request a quota increase.

ResourceInUseException

The operation conflicts with the resource's availability. For example:

You attempted to recreate an existing table.
You tried to delete a table currently in the CREATING state.
You tried to update a resource that was already being updated.

When appropriate, wait for the ongoing update to complete and attempt the request again.

ResourceNotFoundException

The operation tried to access a nonexistent table or index. The resource might not be specified correctly, or its status might not be ACTIVE.

TableAlreadyExistsException

A target table with the specified name already exists.

TableInUseException

A target table with the specified name is either being created or deleted.

TableNotFoundException

A source table with the name TableName does not currently exist within the subscriber's account or the subscriber is operating in the wrong Amazon Web Services Region.

TransactionCanceledException

The entire transaction request was canceled.

DynamoDB cancels a TransactWriteItems request under the following circumstances:

A condition in one of the condition expressions is not met.
A table in the TransactWriteItems request is in a different account or region.
More than one action in the TransactWriteItems operation targets the same item.
There is insufficient provisioned capacity for the transaction to be completed.
An item size becomes too large (larger than 400 KB), or a local secondary index (LSI) becomes too large, or a similar validation error occurs because of changes made by the transaction.
There is a user error, such as an invalid data format.
There is an ongoing TransactWriteItems operation that conflicts with a concurrent TransactWriteItems request. In this case the TransactWriteItems operation fails with a TransactionCanceledException.

DynamoDB cancels a TransactGetItems request under the following circumstances:

There is an ongoing TransactGetItems operation that conflicts with a concurrent PutItem, UpdateItem, DeleteItem or TransactWriteItems request. In this case the TransactGetItems operation fails with a TransactionCanceledException.
A table in the TransactGetItems request is in a different account or region.
There is insufficient provisioned capacity for the transaction to be completed.
There is a user error, such as an invalid data format.

If using Java, DynamoDB lists the cancellation reasons on the CancellationReasons property. This property is not set for other languages. Transaction cancellation reasons are ordered in the order of requested items, if an item has no error it will have None code and Null message.

Cancellation reason codes and possible error messages:

No Errors:
- Code: None
- Message: null
Conditional Check Failed:
- Code: ConditionalCheckFailed
- Message: The conditional request failed.
Item Collection Size Limit Exceeded:
- Code: ItemCollectionSizeLimitExceeded
- Message: Collection size exceeded.
Transaction Conflict:
- Code: TransactionConflict
- Message: Transaction is ongoing for the item.
Provisioned Throughput Exceeded:
- Code: ProvisionedThroughputExceeded
- Messages:
  - The level of configured provisioned throughput for the table was exceeded. Consider increasing your provisioning level with the UpdateTable API.
    
    This Message is received when provisioned throughput is exceeded is on a provisioned DynamoDB table.
  - The level of configured provisioned throughput for one or more global secondary indexes of the table was exceeded. Consider increasing your provisioning level for the under-provisioned global secondary indexes with the UpdateTable API.
    
    This message is returned when provisioned throughput is exceeded is on a provisioned GSI.
Throttling Error:
- Code: ThrottlingError
- Messages:
  - Throughput exceeds the current capacity of your table or index. DynamoDB is automatically scaling your table or index so please try again shortly. If exceptions persist, check if you have a hot key: https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/bp-partition-key-design.html.
    
    This message is returned when writes get throttled on an On-Demand table as DynamoDB is automatically scaling the table.
  - Throughput exceeds the current capacity for one or more global secondary indexes. DynamoDB is automatically scaling your index so please try again shortly.
    
    This message is returned when writes get throttled on an On-Demand GSI as DynamoDB is automatically scaling the GSI.
Validation Error:
- Code: ValidationError
- Messages:
  - One or more parameter values were invalid.
  - The update expression attempted to update the secondary index key beyond allowed size limits.
  - The update expression attempted to update the secondary index key to unsupported type.
  - An operand in the update expression has an incorrect data type.
  - Item size to update has exceeded the maximum allowed size.
  - Number overflow. Attempting to store a number with magnitude larger than supported range.
  - Type mismatch for attribute to update.
  - Nesting Levels have exceeded supported limits.
  - The document path provided in the update expression is invalid for update.
  - The provided expression refers to an attribute that does not exist in the item.

TransactionConflictException

Operation was rejected because there is an ongoing transaction for the item.

TransactionInProgressException

The transaction with the given request token is already in progress.

Recommended Settings

This is a general recommendation for handling the TransactionInProgressException. These settings help ensure that the client retries will trigger completion of the ongoing TransactWriteItems request.

Set clientExecutionTimeout to a value that allows at least one retry to be processed after 5 seconds have elapsed since the first attempt for the TransactWriteItems operation.
Set socketTimeout to a value a little lower than the requestTimeout setting.
requestTimeout should be set based on the time taken for the individual retries of a single HTTP request for your use case, but setting it to 1 second or higher should work well to reduce chances of retries and TransactionInProgressException errors.
Use exponential backoff when retrying and tune backoff if needed.

Assuming default retry policy, example timeout settings based on the guidelines above are as follows:

Example timeline:

0-1000 first attempt
1000-1500 first sleep/delay (default retry policy uses 500 ms as base delay for 4xx errors)
1500-2500 second attempt
2500-3500 second sleep/delay (500 * 2, exponential backoff)
3500-4500 third attempt
4500-6500 third sleep/delay (500 * 2^2)
6500-7500 fourth attempt (this can trigger inline recovery since 5 seconds have elapsed since the first attempt reached TC)

Module errorCopy item path

Modules§

Structs§

Module error